Alfred W. Davis: Complete Plans and Instructions
Semi Deep-V Boat With Options For Outboard, Inboard And Inboard/Outboard Power
Availability: In Stock
The ALFRED W. DAVIS combines a seakindly, semi-deep V-Hull with the strength and versatility of frameless, taped-seam plywood construction to give you a boat that can be built to your needs.
The size and interior arrangement of the house can be varied during the construction as the builder desires, or the house can be left off altogether! The overall length of the hull can also be decreased by as much as 4' without needing to rescale the hull.
Power can be supplied by single or dual outboards or a single inboard/outboard or vee-drive up to 1000 lbs.
The hull is constructed of epoxy encapsulated marine plywood and super-strong Biaxial fiberglass tape. Hull sides are 1/2" plywood and the hull bottom can be built 3/4, 7/8 or 1" thick!
The Plans and Instructions are very complete and include directions for shortening the hull and/or lengthening the house. Patterns are not needed and no lofting is required.
• Length Overall 26'0"
• Length Waterline 22'8"
• Beam 8'5"
• Draft 1'2"
• Displacement 4800 Lbs.
• Headroom 6' 3"
• Fuel Capacity 100 Gal.
• Deadrise at Transom 12 deg.
Qty in Stock: 2
NOTE: Items are not refundable